自上料攪拌車廠家如何防止汽車高溫情況！
1.防止發動機過熱：由于環境溫度高，發動機容易過熱。有必要加強對發動機冷卻系統的檢查和維護。請注意，這包括檢查水箱，恒溫器，水泵，風扇等，并會及時檢查。注意冷卻水。如果水溫超過100°C，請在涼爽的地方停下來冷卻，使發動機空轉并打開引擎蓋以散熱。
1. Prevent the engine from overheating: the engine is easy to overheat due to high ambient temperature. It is necessary to strengthen the inspection and maintenance of the engine cooling system. Please note that this includes checking the water tank, thermostat, water pump, fan, etc. and will be checked in time. Pay attention to cooling water. If the water temperature exceeds 100 ° C, stop in a cool place to cool, idle the engine and open the hood to dissipate heat.
2.防止發動機爆燃：夏季溫度很高，有時會高于35°C。在這樣的季節中，部分老化的汽車更有可能出現。因此要做好預防工作。
2. Prevent engine deflagration: the temperature is very high in summer, sometimes higher than 35 ° C. In this season, some aging cars are more likely to appear. Therefore, we should do a good job in prevention.
3.防止損壞汽車漆：暴露于強光下，汽車漆會老化并起皺，而普通美容蠟具有防曬作用，但汽車蠟中含有鉍。因此，它是由長期的紫外線引起的。油漆生銹并留下黑點。蠟本身不能提高硬度和抗紫外線效果，但會因高溫而迅速消失。停車時，請將車停在涼爽的地方。
3. Prevent damage to the car paint: when exposed to strong light, the car paint will age and wrinkle, while ordinary beauty wax has sunscreen effect, but the car wax contains bismuth. Therefore, it is caused by long-term ultraviolet radiation. The paint rusts and leaves black spots. Wax itself can not improve hardness and UV resistance, but it will disappear rapidly due to high temperature. When parking, please park your car in a cool place.
4.防止輪胎爆裂。如果溫度過高，則容易發生爆胎，如果溫度過高，則輪胎容易變形，拉伸強度降低。由于輪胎本身不是標準壓力，因此可能導致車輛突然爆裂，從而導致輪胎老化，性能下降，或者在行駛時將輪胎滾動成硬質金屬或其他硬物。
4. Prevent tire burst. If the temperature is too high, the tire is easy to burst. If the temperature is too high, the tire is easy to deform and the tensile strength is reduced. Since the tire itself is not the standard pressure, it may cause the vehicle to burst suddenly, resulting in tire aging and performance degradation, or rolling the tire into hard metal or other hard objects when driving.
5.防止發動機潤滑故障：在高溫下，機油粘度會降低，并且會發生潤滑故障。因此，請檢查機油質量并及時添加或更換機油。及時清潔機油濾清器和散熱器，以確保機油平穩流動并充分散熱，避免使發動機過載。
5. Prevent engine lubrication failure: under high temperature, the oil viscosity will decrease and lubrication failure will occur. Therefore, please check the oil quality and add or change the oil in time. Clean the oil filter and radiator in time to ensure the smooth flow of oil and sufficient heat dissipation, so as to avoid overloading the engine.
6.防止制動故障：在高溫環境下，制動液容易蒸發和蒸發，在制動管內形成空氣阻力。另外，剎車蹄很容易磨損，剎車會損壞。因此，應經常檢查和調整制動系統。在長山上，您需要注意駐車制動器，以確保良好的制動性能。如果制動輪轂很熱，請停止并冷卻。
6. Prevent brake failure: in high temperature environment, the brake fluid is easy to evaporate and evaporate, forming air resistance in the brake pipe. In addition, the brake shoes are easy to wear and the brake will be damaged. Therefore, the braking system should be checked and adjusted frequently. On Changshan, you need to pay attention to the parking brake to ensure good braking performance. If the brake hub is hot, stop and cool.
以上就是今天給大家講解的詳細內容，更多的精彩內容請點擊我們的網站自上料攪拌車廠家 http://www.xiaoplaoshi.cn，我們會有更多的精彩內容等您查看.
The above is the detailed content explained to you today. For more wonderful content, please click our website from the charging mixer manufacturer http://www.xiaoplaoshi.cn , we will have more wonderful content for you to see
下一篇：為什么攪拌車不安裝倒車影像？上一篇：攪拌車體檢標準流程有哪些？
