自上料攪拌車輪胎在平時運營中的注意事宜有哪些？
自上料攪拌車輪胎在平時運營中的注意事宜有哪些？
What are the matters needing attention in the normal operation of Zhongke self loading mixer tire?
1、車胎的配搭和組裝
1. Tire matching and assembly
中科自上料攪拌車輪胎組裝得恰當與否可以直接關聯到車胎的使用期，尤其是在拆換新車胎的時候。種類和紋路不一樣的車胎，因為各車胎的具體規格和復合工作能力不一樣，一定不能隨意混放。除此之外，假如您自身還無法充分把握拆換車胎的技能，我們建議您還是到專 業的輪胎店或是車子特邀檢修商處開展拆換。
Whether the tires are properly assembled or not is directly related to the service life of the tires, especially when the tires are replaced. Tires with different types and patterns must not be mixed at will because the specific specifications and composite working ability of each tire are different. In addition, if you still can't fully grasp the professional skills of tire removal and replacement, we suggest that you go to a professional tire shop or a specially invited car repairer to carry out tire removal and replacement.
2、工作標準氣壓
2. Working standard air pressure
司機要依照汽車底盤廠商的規定值給車胎打氣。當胎壓高過規定值時，因車胎接地總面積降低，單位工作壓力提高，使車胎胎面中間毀壞提升，另外擴大了車胎剛度，使車輪遭受的動載負荷提升，非常容易導致胎體崩裂。當胎壓假如小于規定值時，車胎胎肩的毀壞大幅度擴大；因此要依照廠商得出的規定值給車胎打氣。
The driver should inflate the tire according to the specified value of the chassis manufacturer. When the tire pressure is higher than the specified value, due to the reduction of the total ground area of the tire and the increase of the unit working pressure, the middle of the tire tread is damaged and lifted. In addition, the stiffness of the tire is expanded, and the dynamic load of the wheel is increased, which is very easy to cause the carcass cracking. If the tire pressure is less than the specified value, the damage of the tire shoulder will be greatly expanded; therefore, the tire should be inflated according to the specified value obtained by the manufacturer.
3、盡可能挑選在很好的地面駕駛
3. Choose to drive on good ground as much as possible
在路面檢修工程施工路段駕駛時，應使用低速檔緩行挑選地面的方法經過，防止車胎遭受過度撞擊，乃被扎傷或刮傷；在凸凹不平的路面上駕駛，一要挑選地面，緩解車胎與地面的撞擊，防止機械部件及車胎的毀壞；二是要降速緩行，防止車胎晃動和明顯振動；經過泥地路段，應挑選較穩固、不滑的地區經過，以防車胎凹陷、原地空轉、劇烈生熱導致車胎及胎側嚴重劃傷、刮傷。
When driving in the construction section of road maintenance engineering, the method of selecting the ground at low speed should be used to prevent the tire from being excessively impacted, or even bruised or scratched; when driving on the uneven road, firstly, the ground should be selected to alleviate the impact between the tire and the ground, and prevent the damage of mechanical parts and tires; secondly, the speed should be slowed down to prevent the tire from shaking and obvious vibration; thirdly, the vehicle should be driven on the uneven road; When passing through the mud road section, a relatively stable and non slippery area should be selected to avoid serious scratch and scratch on the tire and sidewall caused by tire depression, in-situ idling and severe heat generation.
4、合理操縱駕駛的速度
4. Control driving speed reasonably
車子拐彎時要依據彎道的實時路況、拐彎的半徑，要恰當降速，因為慣性力和向心力的作用，會加快單側車胎損壞；車子下坡時，應依據坡度的大小、長短及地面狀況，操縱恰當?shù)能囁伲绱四軌蚍乐够蛘呱儆镁o急制動，降低車胎損壞；車子在駕駛途中停車和到站停車，應培養可靠滑行的習慣。
When turning a corner, the car should slow down appropriately according to the real-time road conditions and turning radius of the curve, because the inertia force and centripetal force will accelerate the damage of one side tire; when the car goes downhill, it should control the appropriate speed according to the size and length of the slope and the ground conditions, so as to prevent or reduce the use of emergency braking and reduce tire damage; the car stops and arrives at the station on the way When parking, we should cultivate the habit of reliable taxiing.
感謝您的閱讀，希望以上內容對您有所幫助，如您想了解更多精彩內容請點擊我們的官網：自上料攪拌車http://www.xiaoplaoshi.cn。
Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: Zhongke self loading mixer http://www.xiaoplaoshi.cn .
