如何使混凝土攪拌車車輪更耐用
攪拌車輪胎是中科聚峰混凝土攪拌車運行的基本條件，合理使用攪拌輪胎，可以大大提高攪拌輪胎的使用壽命。如何讓攪拌輪更耐用要注意以下幾點:
Mixer tire is the basic condition for the operation of Zhongke Jufeng concrete mixer. Reasonable use of the mixer tire can greatly improve the service life of the mixer tire. How to make the mixing wheel more durable should pay attention to the following points:
1. 避免朝同一個方向移動
1. Avoid moving in the same direction
由于汽車的感覺不好，許多新手更喜歡當場駕駛。這個壞習慣基本上是駕校帶來的。在原位方向上輪胎的磨損會集中在同一接觸面上，導致輪胎局部嚴重磨損，縮短使用壽命。因此，駕駛員應避免在原位方向行駛，而應在車輪滾動方向行駛，在這種情況下，地面對汽車輪胎的攪拌是全范圍和均勻的正常磨損。
Because the car doesn't feel good, many novices prefer to drive on the spot. This bad habit is basically brought about by driving school. In the in-situ direction, the wear of the tire will be concentrated on the same contact surface, resulting in severe local wear of the tire and shortening the service life. Therefore, the driver should avoid driving in the original position direction, but should drive in the wheel rolling direction. In this case, the mixing of the ground to the car tire is full range and uniform normal wear.
2. 避免撞到路肩和進入坑洼
2. Avoid hitting shoulders and entering potholes
有些司機的停車方式很霸道，他們喜歡把自行車停在路上，然后把車停在自己的肩膀上。攪拌機在騎在肩上的過程中，輪胎會被擠壓，很容易導致輪胎側簾線斷裂，造成輪胎脹氣。
Some drivers are aggressive in their way of parking. They like to park their bikes on the road and then park them on their shoulders. When the mixer is riding on the shoulder, the tire will be squeezed, which is easy to cause the tire side cord to break, resulting in tire inflation.
道路上的坑洞也應該避免。當攪拌器的輪胎穿過這個洞時，它也會擠壓。洞越大，速度越快，輪胎被擠壓得越厲害，這也會導致輪胎鼓起來。
Potholes in the road should also be avoided. When the tires of the blender pass through the hole, it also squeezes. The bigger the hole, the faster the speed, the more the tyre is squeezed, which also causes the tyre to bulge.
3.避免摩擦輪胎壁
3. Avoid rubbing the tire wall
很多時候，混音車在停車時無意中碰到輪胎壁，這可能是由于司機感覺不舒服或者是司機讓開了路。攪拌輪胎的一側屬于輪胎的薄弱部位，嚴重的磨損還會造成輪胎脹氣，帶來輪胎穿孔的隱患。因此，司機停車時應注意混合器與肩臺的距離，避免與胎壁摩擦。
In many cases, the mixer accidentally touches the tire wall when parking, which may be due to the driver's discomfort or the driver's getting out of the way. One side of the agitated tire belongs to the weak part of the tire. Serious wear will cause tire inflation, which will lead to tire perforation. Therefore, the driver should pay attention to the distance between the mixer and the shoulder to avoid friction with the tire wall.
4. 保持適當的胎壓
4. Maintain proper tire pressure
適當的胎壓可以保證混煉機輪胎地面面積均勻，減少不必要的磨損。因此，司機應養成定期檢查胎壓的習慣，隨時跟蹤胎壓。你可以去的修理店測試輪胎的氣壓，或者你可以買一個輪胎壓力表來測試自己。胎壓標準可參考混合車的胎壓標簽。
Proper tire pressure can ensure the uniform ground area of the mixer tire and reduce unnecessary wear. Therefore, the driver should develop the habit of regularly checking the tire pressure and tracking the tire pressure at any time. You can go to a professional repair shop to test the tire pressure, or you can buy a tire pressure gauge to test yourself. The tire pressure standard can refer to the tire pressure label of the hybrid vehicle.
5. 夏天不降低胎壓嗎
5. Don't you reduce tire pressure in summer
許多司機錯誤地認為，在夏季高溫時，低胎壓可以防止輪胎漏氣。這樣，攪拌輪胎與地面之間的接觸面就會增大，摩擦力就會增大，加速輪胎的磨損，并會導致攪拌輪胎溫度升高更快，更容易刺穿。因此，在夏季保持正常的胎壓。
Many drivers mistakenly believe that low tire pressure can prevent the tire from leaking when it is hot in summer. In this way, the contact surface between the agitated tire and the ground will increase, the friction will increase, the wear of the tire will be accelerated, and the temperature of the agitated tire will rise faster, and it is easier to puncture. Therefore, maintain normal tire pressure in summer.
以上是中科聚峰混凝土攪拌車廠家為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://www.xiaoplaoshi.cn
The above is the relevant content introduced by the manufacturer of Zhongke Jufeng concrete mixer for you. To learn more, please visit the website: http://www.xiaoplaoshi.cn
