新買的自上料攪拌車使用注意
現在自上料攪拌車的市場需求量很大，很多購買攪拌車的人對新購攪拌車的保養卻不是很清楚，自上料攪拌車的保養還是很重要的。下面自上料攪拌車廠家來講講新買的自上料攪拌車使用注意事項。
At present, the market demand for self loading mixers is very large. Many people who buy mixers are not very clear about the maintenance of newly purchased mixers. The maintenance of self loading mixers is still very important. Next, the manufacturer of the self feeding mixer will talk about the precautions for the use of the newly purchased self feeding mixer.
新車都是有磨合期的，磨合是延長自上料攪拌車使用壽命的基礎，一定要按說明書上的規定進行磨合。油凈、水凈、氣凈和機體凈。柴油是攪拌車發動機的主要燃料，如果柴油不純凈，會使配合機體磨合，配合間隙增大，造成漏油，滴油，供油壓力降低，間隙變大，甚至造成油路堵塞，抱軸燒瓦等嚴重故障。
All new vehicles have a running in period. Running in is the basis for extending the service life of the self feeding mixer, and it must be carried out according to the specifications in the manual. Oil purification, water purification, gas purification and body purification. Diesel oil is the main fuel for the engine of the mixer truck. If the diesel oil is not pure, it will make the mating body run in, increase the mating clearance, cause oil leakage, oil dripping, oil supply pressure reduction, increase the clearance, and even cause serious failures such as blockage of the oil circuit, holding the shaft and burning the pads.
若空氣中含有大量塵土，將會加速缸套、活塞和活塞環的磨損。若冷卻水不純凈，會使冷卻系水垢堵塞后，妨礙發動機散熱，潤滑條件也差，機體磨損嚴重。若機體外表不干凈，會使表面受到腐蝕，縮短使用壽命。柴油和空氣中供應不及時或中斷，就會出現啟動困難，燃燒不良，功率下降，發動機不能正常運轉等現象。若冷卻水供應不足就會使機溫過高，功率下降磨損加劇，降低使用壽命。
If there is a lot of dust in the air, the wear of cylinder liner, piston and piston ring will be accelerated. If the cooling water is not pure, it will block the cooling system scale, hinder the engine heat dissipation, have poor lubrication conditions, and wear the engine body seriously. If the body surface is not clean, the surface will be corroded and the service life will be shortened. If the supply of diesel oil and air is not timely or interrupted, there will be difficulties in starting, poor combustion, power reduction, and abnormal engine operation. If the cooling water supply is insufficient, the machine temperature will be too high, the power will drop, and the wear will increase, reducing the service life.
自上料攪拌車因柴油機使用的過程中受震動沖擊和負荷不均勻等影響，螺栓，螺母容易松動。還有各部位的調整螺栓都要檢查，以免造成因松動而損壞機體的事故。
The bolts and nuts of the self loading mixer are easy to loosen due to the impact of vibration and uneven load during the use of the diesel engine. The adjusting bolts of all parts shall be checked to avoid the accident of damage to the engine body due to looseness.
柴油機的氣門間隙、配氣相位、共有提前角、噴油壓力以及點火正時等都應及時檢查并調整，以保證發動機經常處于良好的技術狀態，方能節省燃油，延長使用壽命。
The valve clearance, valve timing, common advance angle, injection pressure and ignition timing of the diesel engine shall be checked and adjusted in time to ensure that the engine is always in good technical condition, so as to save fuel and prolong its service life.
自上料攪拌車行駛前，應使各瓦軸等潤滑部位得到潤滑。啟動后應待水溫達到40℃-50℃時再投入到作業，嚴禁長時間超負荷或低速作業。停機前，應先卸掉負荷降低轉速。
Before the feeding mixer truck is driven, all bearing shafts and other lubricating parts shall be lubricated. After startup, it shall be put into operation when the water temperature reaches 40 ℃ - 50 ℃. Overload or low-speed operation for a long time is strictly prohibited. Before shutdown, unload the load and reduce the speed.
總之，細致的保養能夠有效的延長攪拌車的使用壽命，各個部件在自上料攪拌車上起著舉足輕重的作用，所以定期對攪拌車部件的檢查也不能缺少，更多相關內容就來我們網站http://www.xiaoplaoshi.cn咨詢了解吧！
In a word, careful maintenance can effectively extend the service life of the mixer. Each component plays a decisive role in the self feeding mixer, so regular inspection of the mixer components can not be lacking. More relevant information can be found on our website http://www.xiaoplaoshi.cn Ask and understand!
下一篇：攪拌車頻發安全事項原因之車輛本身要素上一篇：關于攪拌車的軸承制作工藝
