當前位置：首頁 »新聞中心 » 行業動態全自動攪拌車廠家的發動機積碳油泥的原因！

全自動攪拌車廠家的發動機積碳油泥的原因！

來源：http://www.xiaoplaoshi.cn 瀏覽：0發表時間：2021-05-29

全自動攪拌車廠家的發動機為什么會出現積碳油泥的現象呢？下面就跟大家解釋一下。

Why does the engine of automatic mixer appear the phenomenon of carbon sludge? Now I'll explain to you.

1、采用“高檔低速”的不良駕駛習慣。

1. Adopt the bad driving habit of "high grade and low speed".

2、城市汽車保有量越來越高，導致城市道路交通擁擠，汽車經常處于低速運轉的狀態。

2. Urban car ownership is increasing, leading to urban road traffic congestion, cars are often in a low-speed state.

3、為了提高燃油經濟型，市面上的一些高性能直噴發動機采用了一種叫做稀薄燃燒的技術，通過復雜的燃燒室形狀設計，準 確計算混合氣氣流狀況以及準 確控制點火時間達到減少噴油的目的。

3. In order to improve the fuel economy, some high-performance direct injection engines on the market use a technology called lean combustion. Through the complex design of combustion chamber shape, accurate calculation of mixture flow and accurate control of ignition time, the purpose of reducing fuel injection is achieved.

全自動攪拌車廠家發動機積碳油泥的處理方法：

Treatment method of engine carbon sludge of automatic mixer manufacturer:

先用一塊破布大致上清理一下，然后稍微放一點汽油出來用毛刷惉上把剩下的不好清理的往下刷。刷完以后用換下的機油或者機油瓶里剩余的那點底子惉毛刷上邊再給上一層油就行了。

First use a rag to roughly clean up, then put a little gasoline out, and brush down the rest of the bad ones with a brush. After brushing, use the changed engine oil or the remaining base brush in the oil bottle to add another layer of oil.
全自動攪拌車廠家的發動機積碳油泥的原因

一般也不會專門去清理。大多是在更換機油后和在朋友的修理鋪呆著閑來無事處理一下。拆下來先用洗潔精加水洗頭遍，再用柴油洗再上機油，然后用布把多余的機油抹干凈，上到車子上就可以了。

Generally, they don't clean up specifically. Most of them are after changing the engine oil and staying in a friend's repair shop with nothing to do. First, wash your hair with detergent and water, then wash it with diesel oil, and then apply the engine oil. Then wipe the excess engine oil with a cloth and put it on the car.

平時用淘汰的兒童牙刷沾點機油刷前后齒的接觸部位，盡量少而均勻，這樣才少沾灰塵。拆下鏈條，把鏈條放入大的可樂瓶中，倒入適量清洗劑，蓋上蓋子，搖晃數次，取出裝上。

Usually use the eliminated children's toothbrush with a little oil, brush the front and rear teeth of the contact parts, as far as possible less and even, so as to less dust. Remove the chain, put the chain into a large coke bottle, pour in an appropriate amount of cleaning agent, cover it, shake it several times, take it out and put it on.

經常檢查自己愛車的機油油位。不足時應盡快補充，以減輕原有油品承擔的壓力。要添加汽油添加劑，并且要在大保養的時候?qū)Πl(fā)動機進行積碳清洗。

Always check the oil level of your car. If it is insufficient, it should be supplemented as soon as possible to reduce the pressure of the original oil. To add gasoline additives, and in the major maintenance of the engine carbon cleaning.

以上就是有關全自動攪拌車廠家的發動機出現積碳油泥的現象的原因以及解決的方法，希望能給大家?guī)韼椭?/div>

The above is the reason for the phenomenon of carbon sludge in the engine of the automatic mixer manufacturer and the solution, hoping to bring help to you.

下一篇：自上料攪拌車廠家突然不卸料該怎么辦?上一篇：如何保養混凝土自上料攪拌車的燃油系統？